Rugged Ethernet & Timing Solutions
The CM-6900 Series contains ruggedized managed gigabit and 10gigabit Ethernet switches specially designed to operate reliably in harsh climatically and noisy electrical demanding environments (e.g. high altitude, extreme shock, and vibration, wide temperatures, humidity, dust and water exposure, noisy EMI, dirty power) of military applications. The switches enable modularity and provide growth while delivering optimal performance for Size, Weight, Power, and Cost (SWaP-C) constrained military applications onboard military vehicles. The units are designed to meet the environmental requirements of MIL-STD 810 and the EMI/EMC requirements (Conducted and Radiated Emissions and Susceptibility) of MIL-STD-461 and MIL-STD-1275.
This fully managed, Layer 2/3 gigabit/10gigabit switch family provides a powerful set of networking features, including support for IPv4 multicast traffic filtering according to static filters or IGMP snooping, Virtual Local Area Networks (VLANs), port control (speed/mode/statistics, flow control), Quality of Service (QoS) traffic prioritization, Link Aggregation (802.3ad), SNMP v1/v2/v3 management, secure authentication (802.1X, ACLs, Web/CLI), port mirroring and network redundancy based on RSTP/MSTP.
The CM-6900 series can be equipped with a reliable and accurate PTP Grand Master Clock (GMC) or Transparent Clock/Slave Clock (TC/SC) according to IEEE1588 Std 2008. The platform supports PTP translation to/from PTPv1 (IEEE1588 Std 2002) from/to PTPv2 (IEEE1588 Std 2008). NTP server or client operation can also be supported.
PTP: TC/SC | For GMC Options click here
NTP: Standard NTP server
Power Connector Type: 3pins IEC320C14 for AC
Power Holdup: No Power Holdup
CUSTOM FEATURES: Please note there is a longer lead time for custom features. Contact sales for detailed information.
CM-6900 | RUGGED ETHERNET RACKMOUNT SWITCH
| #1G-12CU | 2 |
|---|---|
| #1G-12SFP | 1 |
| 10G & MANAGEMENT BOARD | 1 G-T ONLY |
| CONNECTORS | 4U – 25xRJ45 for 25x 1G-T, 12xSFP for 12x 1G-X |
| FORM FACTOR | A – 19inch 1U |
| POWER | A – 115-230VAC |
| Switch protocols | |||
| Standards | IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol) IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1X for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) IEEE 1588 (PTPv1 and PTPv2) |
||
| MAC table | 32768 MAC addresses | ||
| Priority queues | 8 | ||
| Switch fabric properties | Store-and-forward and full wire speed on all ports | ||
| Security Features | Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic. Radius centralized password management SNMPv3 encrypted authentication and access security |
||
| Management | HTTP/HTTPS, telnet/SSH, CLI and SNMP v1/v2/v3 | ||
| Built-in test | Built-in test procedure performed at boot time. Continuous BIT procedure when device is powered |
||
| Other protocols | IGMP snooping (up to 1024 multicast filters) Static multicast filter setting Port rate limiting DHCP TOS/Diffserv supported Quality of Service (802.1Q) for real-time traffic VLAN (802.1Q) with VLAN tagging and MVR Port configuration, status, statistics, monitoring, security |
||
| Connectors | |||
| Ethernet copper connectors | RJ45 | ||
| Power connector | 3pins IEC320C14 for AC | ||
| Connector spacing | According to MIL-STD-1472F | ||
| Data Zeroization Support | |||
| Data Zeroization | To erase Non-Volatile Flash Memory and Restore Board to Factory Default Config- uration. Available via HTTP and CLI |
||
| Power | |||
| Power Consumption (Typ.) | 75 | ||
| Overload Current Protection | Yes | ||
| Reverse Polarity Protection | Yes | ||
| Power input | 115-230VAC | ||
| Hold-up | No Power Hold Up | ||
| Physical Characteristics | |||
| Enclosure | Aluminum case | ||
| Dimension (W * D * H) | 482.6mm (W) x 400mm (D) x 44mm (H) / 18.98in (W) x 15.75in (D) x 1.73in (H) | ||
| Weight | approx. 10kg / 22.7lbs. | ||
| Surface finish | Powder paint on top of SurTec 650 | ||
| EMC/Enviromental | |||
| Conducted Emission | IEC55032:2015; IEC61000-3-2:2014; IEC61000-3-3:2013 | ||
| Conducted Susceptibility | IEC61000-4-2:2009 (ESD, 8KV); IEC61000-4-4:2012 (criteria B); IEC61000-4-5:2014 (criteria B); IEC61000-4-6:2014 (criteria A); IEC61000-4-11:2004 (AC voltage dips – criteria B and C, AC voltage interrupts – criteria C); IEC61000-4-13:2002+A1:2009 |
||
| Radiated Emission | IEC55032:2015 | ||
| Radiated Susceptibility | IEC61000-4-3:2006 (criteria A) | ||
| Operational Temperature | MIL-STD-810G: 501.5 and 502.5, [-40..71]C◦ | ||
| Storage Temperature | MIL-STD-810G: 502.5, [-40.. 85]C◦ | ||
| Operational vibration | PSD: 5-500Hz: 2.5 – 0.03gG2/Hz, 2h per axis (operational) PSD: 5-500Hz: 2.8 – 0.175gG2/Hz, 8h per axis (non-operational) |
||
| Shock | 20g, 18ms | ||
FLIGHT-RATED ETHERNET SWITCHES
CM-6200 AER SERIES | 128pins – MANAGED AIRCRAFT ETHERNET SWITCH
FLIGHT-RATED ETHERNET SWITCHES
GROUND & SHIPBOARD ETHERNET SWITCHES
CM-7000-MIL SERIES | MANAGED MILITARY GIGABIT ETHERNET SWITCH
FLIGHT-RATED ETHERNET SWITCHES
FLIGHT-RATED ETHERNET SWITCHES
FLIGHT-RATED ETHERNET SWITCHES
Uncategorized
GROUND & SHIPBOARD ETHERNET SWITCHES
